HP 5961-0509 Pattern ID Area Fill ID Command, Selecting Cross-Hatch, Default No pattern Range

Pattern ID (Area Fill ID) Command

The Pattern ID command (formerly called Area Fill ID) identifies the specific shading, cross-hatch, or user-defined pattern. (This command is also used for rectangular area fill. Refer to Chapter 14, PCL Rectangular Area Fill Graphics.)

EC * c # G

Table 13-2

		Selecting Cross-Hatch
Selecting Shaded patterns		patterns:
# =	1 thru 2 = 1-2% shade	# =	1 - Pattern #1
	3 thru 10 = 3-10% shade		2 - Pattern #2
	11 thru 20 = 11-20% shade		3 - Pattern #3
	21 thru 35 = 21-35% shade		4 - Pattern #4
	36 thru 55 = 36-55% shade		5 - Pattern #5
	56 thru 80 = 56-80% shade		6 - Pattern #6
	81 thru 99 = 81-99% shade
	100 = 100% shade
Selecting User-Defined patterns:1

#= ID number of user-defined pattern

1.Not supported on all LaserJet family printers. Refer to the “PCL Feature Support Matrix” in Chapter 1 of the PCL 5 Comparison Guide for specifics.

#=ID number of user-defined pattern

Default	=	0	(no pattern)
Range	=	0	- 32767 (values outside the range are ignored)

For rectangular areas, the pattern material is determined by both the pattern ID and the value of the Fill Rectangular Area command. For other images, the pattern material is determined by the pattern ID and the value of the Select Pattern command.

Figure 13-4 and Figure 13-5 illustrate the HP-defined shading patterns and cross-hatched patterns, respectively.

13-8The PCL Print Model EN