HP 5961-0509 Enlarged or reduced to fit the PCL Picture Frame the amount, 18-4The Picture Frame

	If a drawing does not meet the above criteria and the drawing is not
	the same size as the picture frame, the HP-GL/2 plot size must be
	specified to accomplish the desired scaling. If it is not specified, the
	image is clipped to the effective window and no scaling occurs.
Note	The above bulleted items are required for automatic scaling when the
	picture frame size changes, without specifying the HP-GL/2 plot size.
	However, if an HP-GL/2 plot size is specified, any unscaled HP-GL/2
	image (any image created without the SC command) is automatically
	enlarged or reduced to fit the PCL Picture Frame; the amount of
	enlargement or reduction is determined by the picture frame scaling
	factor (the ratio of the HP-GL/2 plot size to the PCL Picture Frame
	size). See Chapter 19 to specify an HP-GL/2 plot size.

18-4The Picture Frame EN