HP 5961-0509 manual Format UB, Format Continuation non-zero Raster Character Data in bytes

Table 11-35 PCL Bitmap Character Descriptor and Data Format (continued)

6Left Offset

8Top Offset

10Character Width

12Character Height

14Delta X

16Raster Character Data: (in bytes)

￿

Table 11-36 PCL Bitmap Continuation Character Descriptor and Data Format

Byte	15 (MSB)	8	7	(LSB) 0
0	Format (4)		Continuation (non-zero)
2	Raster Character Data: (in bytes)
	￿

Format (UB)

This is the first byte of every character data block header. It specifies the format of the character descriptor and data. The format number used for bitmap fonts is 4. This format must match that of the Font Header.

Table 11-37

Value Format

4LaserJet Family (Raster)

10* Intellifont Scalable

15* TrueType Scalable

*These are described later in this chapter.

If the format number is different from that expected by the device, the character is discarded.

11-52Soft Font Creation EN