HP 5961-0509 manual Description Option1 Option2, Shaded Fill Shading Ignored

zscreen_type— Selects the types of screening as follows:

•0— No screening

•1— Shaded fill

•2— HP-GL/2 User-defined raster fill (RF command)

•21— Predefined PCL cross-hatch patterns

•22— PCL user-defined raster fill (RF command)

•Option1, Option2— The definition of these optional parameters depends on the screen type selected. The following table lists the options available for each fill type.

Table 22-21

Screen/Type	Description	Option1	Option2
1	Shaded Fill	% Shading	Ignored
		(0 to 100)
2	HP-GL/2	Pattern Index	0—Pen 1
	User-defined		1—Current Pen
	Raster Fill
21	PCL Cross-hatch	1 - 6	Ignored
22	PCL User-defined	Pattern ID	Ignored
	Pattern Fill

For Type 1, specify the shading percentage using a number from 0 to

100.For example, to print vectors that are shaded 15%, specify (SV1,15;).

For Type 2, option1 specifies the index number of the fill pattern created using the RF (Raster Fill Definition) command. Option2 specifies whether the pattern should be printed in the color of pen number 1 (option2 = 0 parameter) or the current pen (option2 = 1 parameter). The selected pen is applied to the 1’s pixels in the raster pattern.

For Type 21, the option1 parameter selects one of the six predefined PCL cross-hatch patterns using a value between 1 and 6. Refer to the FT command for an illustration of the six different patterns and their corresponding parameter numbers.

22-40The Line and Fill Attributes Group EN