HP 5961-0509 manual Configuration and Status Group Commands, Command Summary

Table 19-1 The Configuration and Status Group Commands

Command	Summary
CO, Comment	Allows comments to be included in an
	HP-GL/2 command sequence.
DF, Default	Sets most programmable HP-GL/2
	features to their default conditions.
IN,Initialize	Sets all programmable HP-GL/2 features
	to their default conditions.
IP, Input P1 and P2	Establishes new or default locations for
	the scaling points P1 and P2.
IR, Input Relative P1	Establishes P1 and P2 locations as a
and P2	percentage of the PCL Picture Frame.
IW, Input Window	Sets up a window (soft-clip limits).
PG, Advance Full Page	This command is ignored.1
RO, Rotate Coordinate	Rotates the HP-GL/2 coordinate system.
System
RP, Replot	This command is ignored.
SC, Scale	Establishes a user-unit coordinate
	system.

1.These commands, useful in plotter applications, are not the optimal solution for PCL 5 printers. Other PCL commands perform similar functions (see the Number of Copies and Form Feed command descriptions).

19-2The Configuration and Status Group EN