HP 5961-0509 Draw an edge around the rectangle that was, 1500,1000, you do not need to specify

Table 21-4 Example: Filled Rectangles (continued)

EP;	Draw an edge around the rectangle that was
	just drawn. Since the previous RR command
	leaves its definition in the polygon buffer
	(1500,1000), you do not need to specify the
	coordinates again.
PR2000,0;	Specify relative plotting and move the cursor
	2000 plu in the X direction from the current pen
	location.
FT4,100,45;	Specify fill type number 4 (cross-hatching), set
	the spacing to 100 plu between fill lines, and set
	the fill line angle to 45°.
RR1500,1000;	Fill a rectangle with the currently specified fill
	type. Use the current pen location (0,0) as the
	lower left corner of the rectangle and a point
	(1500,1000) relative plu away for the upper
	right corner.
?%0A	Enter the PCL mode.
?E	Send a reset to end the job and eject the page.

Figure 21-2

EN Drawing Rectangles 21-5