HP 5961-0509 manual 6Font Management

To delete the character “p” (112 decimal) in a bitmap or bound scalable font with an ID of 1, send:

EC *c1d112e3F

(A space is printed in place of the deleted character. Also, the EC*c#E Character Code command used in the above sequence “...112e...,” is described in Chapter 11.)

To make the soft font with an ID of 2 temporary, send:

EC *c2d4F

To make the soft font with an ID of 2 permanent, send:

EC *c2d5F

	To make a copy of the currently invoked (selected) font, with an
	ID of 9, send:
	EC *c9d6F
	The Copy/Assign font control feature can be used to copy either ROM
	or RAM fonts into RAM assigning them ID numbers.
Note	When the currently selected font is a scalable TrueType ROM font,
	E *c#d6F assigns a font ID number, but makes no copy of the font
	C
	in RAM. Any attempts to download or delete characters within the font
	are ignored. An attempt to delete the font merely results in the loss of
	the ID number.

9-6Font Management EN