Software Setup Guide
BEFORE INSTALLING THE SOFTWARE SETUP IN A WINDOWS ENVIRONMENT
SETUP IN A MACINTOSH ENVIRONMENT TROUBLESHOOTING
DIGITAL FULL COLOR MULTIFUNCTIONAL SYSTEM
SOFTWARE LICENSE
Please note
TABLE OF CONTENTS
BEFORE INSTALLING THE 1 SOFTWARE
SETUP IN A MACINTOSH 3 ENVIRONMENT
4 TROUBLESHOOTING
1 BEFORE INSTALLING THE SOFTWARE
CD-ROMS AND SOFTWARE
SOFTWARE CD-ROM
can only be used when the machine is connected to a network
Disc Software for Windows
Software for Macintosh
Printer driver
PPD file
OTHER CD-ROMS
VERIFYING SYSTEM REQUIREMENTS
SYSTEM REQUIREMENTS
Windows
Macintosh*4
SOFTWARE REQUIREMENTS
Operating
system
Software
CONNECTING THE MACHINE
CONNECTING TO A NETWORK
CONNECTING THE MACHINE WITH A USB CABLE Windows
2 SETUP IN A WINDOWS ENVIRONMENT
OPENING THE SOFTWARE SELECTION SCREEN FOR ALL SOFTWARE
3 Double-click the Setup icon
1 Insert the Software CD-ROM into your computers CD-ROM drive
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
WHEN THE MACHINE IS CONNECTED TO A NETWORK
1 Click the Printer Driver button
2 Click the Standard installation button
6 When the installation completed screen appears, click the OK button
This completes the installation
5 Follow the on-screen instructions
7 Click the Close button in the window of step
X Advanced installation
2 Click the Advanced installation button
1 Click the Printer Driver button
Window confirming installation of the display fonts
Printer name window
X Installation by specifying the machines address
2 Click the Custom installation button
3 When you are asked how the printer is
1 Click the Printer Driver button
8 When the printer name window appears, click the Next button
10 Follow the on-screen instructions
12 Click the Close button in the window of step
X Printing using the IPP function and the SSL function
2 Click the Custom installation button
1 Click the Printer Driver button
6 Perform steps 5 through 12 on page 15 to continue the installation
This completes the installation
When SSL is used
5 Enter the machines URL and click the Next button
WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE
2 Click the Custom installation button
1 Click the Printer Driver button
8 Installation of the PCL6 or SAPL-c printer driver begins
1 Make sure that the machine is powered on
2 Connect the cable to the USB connector B type on the machine
This completes the installation
2 Click the Custom installation button
When installing the PS printer driver, PPD driver, or PC-Fax driver
1 Click the Printer Driver button
7 When the printer name window appears, click the Next button
This completes the installation
9 Follow the on-screen instructions
11 Click the Close button in the window of step
USING THE MACHINE AS A SHARED PRINTER
4 Select the printer name configured as a shared printer
2 Click the Custom installation button
5 Perform steps 5 through 12 on page 15 to continue the installation
3 Click the Configuration tab 4 Click the Auto Configuration button
2 Open the printer properties window
1 Right-click the printer driver icon of the machine
2 Select Properties
5 Configure the image of the machine
1 Select the options that are installed on the machine
If automatic configuration fails
6 Click the OK button in the printer properties window
1 Click the Device Settings tab
2 Configure each item based on the machine configuration
2 Open the printer properties window
1 Right-click the printer driver icon of the machine
INSTALLING THE PRINTER STATUS MONITOR
When the installation completed screen
This completes the installation
appears, click the Finish button
INSTALLING THE SCANNER DRIVER
3 When the finish setup window appears, click the OK button
1 Click the Scanner Driver TWAIN button
2 Follow the on-screen instructions
This completes the configuration of the scanner driver
8 Click the OK button
INSTALLING THE PS DISPLAY FONTS
3 Double-click the Setup icon
6 Click the PS Display Font button
7 Follow the on-screen instructions
CHANGING THE PORT
2 Open the printer properties window
3 Adding or changing a port
1 Right-click the printer driver icon of the machine
4 Select SC2 TCP/IP Port and then click the New Port button
5 Create the new port
6 Click the Close button in the screen of step
Follow steps 1 to 3 of CHANGING THE
Configure the port settings
5 Select Custom and click the Settings button
Click the Next button
7 Click the Next button in the screen of step
SETUP IN A MACINTOSH 3 ENVIRONMENT
MAC OS
1 Insert the Software CD-ROM into your computers CD-ROM drive
2 Double-click the CD-ROM icon on the desktop
9 Click the Install button
12 Double-click the Printer Setup Utility icon
11 Select Utilities from the Go menu
13 Click Add
14 Configure the printer driver
1 Click the Default Browser icon
v10.4.11, v10.5 - 10.5.8, v10.6
2 Click the machines model name
16 Select the machine configuration
1 Select Installable Options
2 Select the options that are installed on the machine
This completes the configuration of the printer driver
3 Select Sharp in Print Using and click the PPD file of your model
v10.4.11, v10.5 - 10.5.8, v10.6
1 Click the IP Printer icon
v10.2.8
MAC OS 9.0
3 Double-click the Installer icon 4 Click the Install button
1 Download the software and save the extracted files in any folder
2 Double-click the MacOS folder
11 Click the Configure button
12 Select the machine configuration
1 Select the options that are installed on the machine
This completes the configuration of the printer driver
4 TROUBLESHOOTING
WHEN INSTALLATION WAS NOT SUCCESSFUL
Problem
Solution
Problem
Solution
Point to check
The machine is not
2 Click Performance and Maintenance and then System
4 Check the settings in What action do
Problem
Solution
REMOVING THE SOFTWARE
2 Click Uninstall a program
3 Delete the installation information
2 Double-click the MacOS folder 3 Double-click the Installer icon
MX-2010U/MX-2310U Software Setup Guide
SSG-SAPL-EX-ZZ