Sharp MX-2310U, MX-2010U setup guide Click the Standard installation button

INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER

2 Click the [Standard installation] button.

3 Printers connected to the network are detected. Select the machine and click the [Next] button.

When [Custom installation] is selected, you can change any of the items below. When [Standard installation] is selected, the installation will take place as indicated below.

•Machine connection method: LPR Direct Print (Auto Search)

•Set as default printer: Yes

(excluding the PC-Fax driver)

•Printer driver name: Cannot be changed

•PCL printer display fonts (Only at the time of PCL, PS printer driver or PPD driver installation): Installed

If you selected [Custom installation], select [LPR Direct Print (Auto Search)] and click the [Next] button. If you selected other than [LPR Direct Print (Auto Search)], see the following pages:

•LPR Direct Print (Specify Address): page 14

•IPP: page 16 • Shared printer: page 22

•Connected to this computer: page 18

When SAPL-c driver is installed, the [Advanced installation] button is not displayed.

• This screen is not displayed when only 1 device is found in the search results.

•If the machine is not found, make sure that the machine is powered on and that the machine is connected to the network, and then click the [Re-search] button.

•You can also click the [Specify condition] button and search for the machine by entering the machine's name (host name) or IP address.

☞Checking the IP address of the machine (page 7)

4 A confirmation window appears. Check the contents and then click the [Next] button.

10