SETUP IN A MACINTOSH ENVIRONMENT TROUBLESHOOTING
Software Setup Guide
BEFORE INSTALLING THE SOFTWARE SETUP IN A WINDOWS ENVIRONMENT
DIGITAL FULL COLOR MULTIFUNCTIONAL SYSTEM
SOFTWARE LICENSE
Please note
SETUP IN A MACINTOSH 3 ENVIRONMENT
TABLE OF CONTENTS
BEFORE INSTALLING THE 1 SOFTWARE
4 TROUBLESHOOTING
SOFTWARE CD-ROM
1 BEFORE INSTALLING THE SOFTWARE
CD-ROMS AND SOFTWARE
can only be used when the machine is connected to a network
Printer driver
Disc Software for Windows
Software for Macintosh
PPD file
OTHER CD-ROMS
Windows
VERIFYING SYSTEM REQUIREMENTS
SYSTEM REQUIREMENTS
Macintosh*4
system
SOFTWARE REQUIREMENTS
Operating
Software
CONNECTING TO A NETWORK
CONNECTING THE MACHINE
CONNECTING THE MACHINE WITH A USB CABLE Windows
3 Double-click the Setup icon
2 SETUP IN A WINDOWS ENVIRONMENT
OPENING THE SOFTWARE SELECTION SCREEN FOR ALL SOFTWARE
1 Insert the Software CD-ROM into your computers CD-ROM drive
WHEN THE MACHINE IS CONNECTED TO A NETWORK
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
1 Click the Printer Driver button
2 Click the Standard installation button
5 Follow the on-screen instructions
6 When the installation completed screen appears, click the OK button
This completes the installation
7 Click the Close button in the window of step
2 Click the Advanced installation button
X Advanced installation
1 Click the Printer Driver button
Window confirming installation of the display fonts
Printer name window
3 When you are asked how the printer is
X Installation by specifying the machines address
2 Click the Custom installation button
1 Click the Printer Driver button
10 Follow the on-screen instructions
8 When the printer name window appears, click the Next button
12 Click the Close button in the window of step
2 Click the Custom installation button
X Printing using the IPP function and the SSL function
1 Click the Printer Driver button
When SSL is used
6 Perform steps 5 through 12 on page 15 to continue the installation
This completes the installation
5 Enter the machines URL and click the Next button
2 Click the Custom installation button
WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE
1 Click the Printer Driver button
2 Connect the cable to the USB connector B type on the machine
8 Installation of the PCL6 or SAPL-c printer driver begins
1 Make sure that the machine is powered on
This completes the installation
When installing the PS printer driver, PPD driver, or PC-Fax driver
2 Click the Custom installation button
1 Click the Printer Driver button
9 Follow the on-screen instructions
7 When the printer name window appears, click the Next button
This completes the installation
11 Click the Close button in the window of step
2 Click the Custom installation button
USING THE MACHINE AS A SHARED PRINTER
4 Select the printer name configured as a shared printer
5 Perform steps 5 through 12 on page 15 to continue the installation
1 Right-click the printer driver icon of the machine
3 Click the Configuration tab 4 Click the Auto Configuration button
2 Open the printer properties window
2 Select Properties
If automatic configuration fails
5 Configure the image of the machine
1 Select the options that are installed on the machine
6 Click the OK button in the printer properties window
2 Open the printer properties window
1 Click the Device Settings tab
2 Configure each item based on the machine configuration
1 Right-click the printer driver icon of the machine
This completes the installation
INSTALLING THE PRINTER STATUS MONITOR
When the installation completed screen
appears, click the Finish button
1 Click the Scanner Driver TWAIN button
INSTALLING THE SCANNER DRIVER
3 When the finish setup window appears, click the OK button
2 Follow the on-screen instructions
This completes the configuration of the scanner driver
8 Click the OK button
6 Click the PS Display Font button
INSTALLING THE PS DISPLAY FONTS
3 Double-click the Setup icon
7 Follow the on-screen instructions
3 Adding or changing a port
CHANGING THE PORT
2 Open the printer properties window
1 Right-click the printer driver icon of the machine
6 Click the Close button in the screen of step
4 Select SC2 TCP/IP Port and then click the New Port button
5 Create the new port
Follow steps 1 to 3 of CHANGING THE
Click the Next button
Configure the port settings
5 Select Custom and click the Settings button
7 Click the Next button in the screen of step
1 Insert the Software CD-ROM into your computers CD-ROM drive
SETUP IN A MACINTOSH 3 ENVIRONMENT
MAC OS
2 Double-click the CD-ROM icon on the desktop
11 Select Utilities from the Go menu
9 Click the Install button
12 Double-click the Printer Setup Utility icon
13 Click Add
v10.4.11, v10.5 - 10.5.8, v10.6
14 Configure the printer driver
1 Click the Default Browser icon
2 Click the machines model name
2 Select the options that are installed on the machine
16 Select the machine configuration
1 Select Installable Options
This completes the configuration of the printer driver
1 Click the IP Printer icon
3 Select Sharp in Print Using and click the PPD file of your model
v10.4.11, v10.5 - 10.5.8, v10.6
v10.2.8
1 Download the software and save the extracted files in any folder
MAC OS 9.0
3 Double-click the Installer icon 4 Click the Install button
2 Double-click the MacOS folder
1 Select the options that are installed on the machine
11 Click the Configure button
12 Select the machine configuration
This completes the configuration of the printer driver
Problem
4 TROUBLESHOOTING
WHEN INSTALLATION WAS NOT SUCCESSFUL
Solution
Point to check
Problem
Solution
The machine is not
Problem
2 Click Performance and Maintenance and then System
4 Check the settings in What action do
Solution
3 Delete the installation information
REMOVING THE SOFTWARE
2 Click Uninstall a program
2 Double-click the MacOS folder 3 Double-click the Installer icon
MX-2010U/MX-2310U Software Setup Guide
SSG-SAPL-EX-ZZ
