BEFORE INSTALLING THE SOFTWARE SETUP IN A WINDOWS ENVIRONMENT
Software Setup Guide
SETUP IN A MACINTOSH ENVIRONMENT TROUBLESHOOTING
DIGITAL FULL COLOR MULTIFUNCTIONAL SYSTEM
Please note
SOFTWARE LICENSE
BEFORE INSTALLING THE 1 SOFTWARE
TABLE OF CONTENTS
SETUP IN A MACINTOSH 3 ENVIRONMENT
4 TROUBLESHOOTING
CD-ROMS AND SOFTWARE
1 BEFORE INSTALLING THE SOFTWARE
SOFTWARE CD-ROM
can only be used when the machine is connected to a network
Software for Macintosh
Disc Software for Windows
Printer driver
PPD file
OTHER CD-ROMS
SYSTEM REQUIREMENTS
VERIFYING SYSTEM REQUIREMENTS
Windows
Macintosh*4
Operating
SOFTWARE REQUIREMENTS
system
Software
CONNECTING THE MACHINE
CONNECTING TO A NETWORK
CONNECTING THE MACHINE WITH A USB CABLE Windows
OPENING THE SOFTWARE SELECTION SCREEN FOR ALL SOFTWARE
2 SETUP IN A WINDOWS ENVIRONMENT
3 Double-click the Setup icon
1 Insert the Software CD-ROM into your computers CD-ROM drive
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
WHEN THE MACHINE IS CONNECTED TO A NETWORK
1 Click the Printer Driver button
2 Click the Standard installation button
This completes the installation
6 When the installation completed screen appears, click the OK button
5 Follow the on-screen instructions
7 Click the Close button in the window of step
X Advanced installation
2 Click the Advanced installation button
1 Click the Printer Driver button
Printer name window
Window confirming installation of the display fonts
2 Click the Custom installation button
X Installation by specifying the machines address
3 When you are asked how the printer is
1 Click the Printer Driver button
8 When the printer name window appears, click the Next button
10 Follow the on-screen instructions
12 Click the Close button in the window of step
X Printing using the IPP function and the SSL function
2 Click the Custom installation button
1 Click the Printer Driver button
This completes the installation
6 Perform steps 5 through 12 on page 15 to continue the installation
When SSL is used
5 Enter the machines URL and click the Next button
WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE
2 Click the Custom installation button
1 Click the Printer Driver button
1 Make sure that the machine is powered on
8 Installation of the PCL6 or SAPL-c printer driver begins
2 Connect the cable to the USB connector B type on the machine
This completes the installation
2 Click the Custom installation button
When installing the PS printer driver, PPD driver, or PC-Fax driver
1 Click the Printer Driver button
This completes the installation
7 When the printer name window appears, click the Next button
9 Follow the on-screen instructions
11 Click the Close button in the window of step
4 Select the printer name configured as a shared printer
USING THE MACHINE AS A SHARED PRINTER
2 Click the Custom installation button
5 Perform steps 5 through 12 on page 15 to continue the installation
2 Open the printer properties window
3 Click the Configuration tab 4 Click the Auto Configuration button
1 Right-click the printer driver icon of the machine
2 Select Properties
1 Select the options that are installed on the machine
5 Configure the image of the machine
If automatic configuration fails
6 Click the OK button in the printer properties window
2 Configure each item based on the machine configuration
1 Click the Device Settings tab
2 Open the printer properties window
1 Right-click the printer driver icon of the machine
When the installation completed screen
INSTALLING THE PRINTER STATUS MONITOR
This completes the installation
appears, click the Finish button
3 When the finish setup window appears, click the OK button
INSTALLING THE SCANNER DRIVER
1 Click the Scanner Driver TWAIN button
2 Follow the on-screen instructions
8 Click the OK button
This completes the configuration of the scanner driver
3 Double-click the Setup icon
INSTALLING THE PS DISPLAY FONTS
6 Click the PS Display Font button
7 Follow the on-screen instructions
2 Open the printer properties window
CHANGING THE PORT
3 Adding or changing a port
1 Right-click the printer driver icon of the machine
5 Create the new port
4 Select SC2 TCP/IP Port and then click the New Port button
6 Click the Close button in the screen of step
Follow steps 1 to 3 of CHANGING THE
5 Select Custom and click the Settings button
Configure the port settings
Click the Next button
7 Click the Next button in the screen of step
MAC OS
SETUP IN A MACINTOSH 3 ENVIRONMENT
1 Insert the Software CD-ROM into your computers CD-ROM drive
2 Double-click the CD-ROM icon on the desktop
12 Double-click the Printer Setup Utility icon
9 Click the Install button
11 Select Utilities from the Go menu
13 Click Add
1 Click the Default Browser icon
14 Configure the printer driver
v10.4.11, v10.5 - 10.5.8, v10.6
2 Click the machines model name
1 Select Installable Options
16 Select the machine configuration
2 Select the options that are installed on the machine
This completes the configuration of the printer driver
v10.4.11, v10.5 - 10.5.8, v10.6
3 Select Sharp in Print Using and click the PPD file of your model
1 Click the IP Printer icon
v10.2.8
3 Double-click the Installer icon 4 Click the Install button
MAC OS 9.0
1 Download the software and save the extracted files in any folder
2 Double-click the MacOS folder
12 Select the machine configuration
11 Click the Configure button
1 Select the options that are installed on the machine
This completes the configuration of the printer driver
WHEN INSTALLATION WAS NOT SUCCESSFUL
4 TROUBLESHOOTING
Problem
Solution
Solution
Problem
Point to check
The machine is not
4 Check the settings in What action do
2 Click Performance and Maintenance and then System
Problem
Solution
2 Click Uninstall a program
REMOVING THE SOFTWARE
3 Delete the installation information
2 Double-click the MacOS folder 3 Double-click the Installer icon
SSG-SAPL-EX-ZZ
MX-2010U/MX-2310U Software Setup Guide