Sharp MX-2310U, MX-2010U Click the Printer Driver button, Click the Custom installation button

INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER

When installing the PS printer driver, PPD driver, or PC-Fax driver

Installation is possible even after the USB cable has been connected. When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION SCREEN (FOR ALL SOFTWARE)" (page 8), perform the steps below.

1 Click the [Printer Driver] button.

To install the PC-Fax driver, click the [PC-Fax Driver] button on the "Disc 2" CD-ROM.

3 When you are asked how the printer is connected, select [Connected to this computer] and click the [Next] button.

*The above screen appears when using the "Disc 1" CD-ROM.

2 Click the [Custom installation] button.

4 When the port selection window appears, select the port that the PCL6 or SAPL-c printer driver is using (USB001, etc.) and click the [Next] button.

5 When the printer driver selection window appears, remove the [PCL6] checkmark and select the printer driver to be installed, and then click the [Next] button.

Click the checkbox of the printer driver to be installed so that a checkmark ( ) appears.

•When the PC-Fax driver is being installed, this screen does not appear. Go to the next step.

•The PS3 expansion kit is required to use the PS printer driver or the PPD driver.

20