Sharp MX-2010U Problem, Point to check, Solution, The machine is not, detected when, network

			WHEN INSTALLATION WAS NOT SUCCESSFUL
Problem	Point to check			Solution
The machine is not	Is the machine power on?	If the machine is powered off, it will not be detected.
detected (when		Switch on the main power switch and the [POWER] key
connected to a		(		) in that order. (In Windows, search again after
network).		powering on the machine.)
	Is your computer connected correctly to	Make sure that the cable is connected securely to the
	the machine?	LAN connectors on your computer and the machine.
		Check the connections at the hub as well.
		☞CONNECTING TO A NETWORK (page 7)
The plug and play
	Is the machine power on?	When a USB cable is connected, make sure the power
screen does not		of the machine is "ON" and then connect a USB cable to
appear (USB		the machine. When the machine is not powered on,
connection in		switch on the main power switch and the [POWER] key
Windows).		(		) in that order.
	Can your computer use a USB	Check your computer whether or not a USB interface
	connection?	can be used on the Device Manager in your computer.
		(For information on "Device Manager", see Help in
		Windows.)
		If USB can be used, your controller chipset type and
		root hub will appear in "Universal Serial Bus controllers"
		in "Device Manager". (The items that appear will vary
		depending on your computer.)

If these two items appear, USB should be useable. If a yellow exclamation point appears next to "Universal Serial Bus controllers" or the two items do not appear, refer to your computer manual or check with the manufacturer of your computer to enable USB and then reinstall the printer driver.

41