Sharp MX-2310U, MX-2010U setup guide X Advanced installation, Click the Printer Driver button

INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER

XAdvanced installation

With the advanced installation, you can select the printer driver to be installed.

When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION SCREEN (FOR ALL SOFTWARE)" (page 8), perform the steps below.

When SAPL-c driver is installed, this installation is not performed.

1 Click the [Printer Driver] button.

To install the PC-Fax driver, click the [PC-Fax Driver] button on the "Disc 2" CD-ROM.

3 Printers connected to the network are detected. Select the machine and click the [Next] button.

*The above screen appears when using the "Disc 1" CD-ROM.

2 Click the [Advanced installation] button.

When [Custom installation] is selected, you can change any of the items below. When [Standard installation] is selected, the installation will take place as indicated below.

•Machine connection method: LPR Direct Print (Auto Search)

•Set as default printer: Yes

(excluding the PC-Fax driver)

•Printer driver name: Cannot be changed

•PCL printer display fonts: Installed

• If the machine is not found, make sure that the machine is powered on and that the machine is connected to the network, and then click the [Re-search] button.

•You can also click the [Specify condition] button and search for the machine by entering the machine's name (host name) or IP address.

☞Checking the IP address of the machine (page 7)

4 A confirmation window appears. Check the contents and then click the [Next] button.

If you selected [Custom installation], select [LPR Direct Print (Auto Search)] and click the [Next] button. If you selected other than [LPR Direct Print (Auto Search)], see the following pages:

•LPR Direct Print (Specify Address): page 14

•IPP: page 16 • Shared printer: page 22

•Connected to this computer: page 18

12