0323G_3 2/22/06 8:58 PM Page 81
20.Abnormal State (Command2:z) To recognize an abnormal state. Transmission [k][z][ ][Set ID][ ][FF][ ][Cr] Data FF: Read
Acknowledgement [z][ ][Set ID][ ][OK][Data][x] Data 0: Normal (Power on and signal exist) Data 1: No signal (Power on)
Data 2: Turn the TV off by remote control
Data 3: Turn the TV off by sleep time function
Data 4: Turn the TV off by
Data 5: 5V down
Data 6: AC down
Data 7: Turn the TV off by Fan Alarm function (option)
Data 8: Turn the TV off by Off time function
Data 9: Turn the TV off by Auto sleep function * This function is “read only”.
21.ISM Method (Command1:j, Command2:p)
To control the ISM method. You can also adjust ISM Method in SPECIAL menu.
This feature is not available for all models.
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Data 0: Normal Mode | Data 1: White Wash |
Data2: Orbiter | Data3: Inversion |
Acknowledgement [p][ ][Set ID][ ][OK][Data][x]
22. Low Power (Command1:j, Command2:q)
To reduce the power consumption of the monitor. You can also adjust Low Power in SPECIAL menu.
This feature is not available for all models.
Transmission [j][q][ ][Set ID][ ][Data][ ][Cr]
Data 0: OffData 1: On
Acknowledgement [q][ ][Set ID][ ][OK][Data][x]
23.Orbiter Time Setting (Command1:j, Command2:r) To adjust orbiter operation time term.
Transmission [j][r][ ][Set ID][ ][Data][ ][Cr]
Data Min: 1 ~ Max: FE
Refer to ‘Real data mapping 1’. See page 82. Acknowledgement [r][ ][Set ID][ ][OK][Data][x]
24 . Orbiter Pixel Setting (Command1:j, Command2:s)
To adjust pixel number in orbiter function.
Transmission [j][s][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: 3
Refer to ‘Real data mapping 1’. See page 82.
Acknowledgement [r][ ][Set ID][ ][OK][Data][x]
25 . Auto Configure (Command1:j, Command2:u)
To adjust picture position and minimize image
shaking automatically. It works only in RGB (PC) mode.
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Data 1: To set
Acknowledgement [u][ ][Set ID][ ][OK][Data][x]
26 . Programme selection (Command1m, Command2:a)
To select a programme for the main picture.
Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]
[ ][Data2][Cr]
Data 0: Min: 0 ~ Max: 63 (0 ~ C7, 200 Pr is on)
Refer to ‘Real data mapping 1’. See page 82.
Data 1: Don’t care
Data 2: 0 : Main
1 : Sub
Acknowledgement [a][ ][Set ID][ ][OK][Data0][x]
* Real data mapping 1 | * Real data mapping 2 | ||
0 | : Step 0 | 0 | : |
|
| 1 | : |
A | : Step 10 (Set ID 10) | 2 | : |
F | : Step 15 (Set ID 15) | 28 : 0 | |
10 | : Step 16 (Set ID 16) |
|
|
|
| 4E : +38 | |
64 | : Step 100 | 4F : +39 | |
|
| 50 : +40 | |
6E | : Step 110 |
|
|
73 | : Step 115 |
|
|
74 | : Step 116 |
|
|
C7 | : Step 199 |
|
|
FE | : Step 254 |
|
|
FF | : Step 255 |
|
|
APPENDIX
81
