LG Electronics 42PC1RV Sharpness Command2k To adjust the screen sharpness, OSD Select Command2l

0323G_3 2/22/06 8:58 PM Page 80

APPENDIX

	10. Sharpness (Command2:k)
	To adjust the screen sharpness.
	You can also adjust sharpness in the PICTURE menu.
		Transmission [k][k][ ][Set ID][ ][Data][Cr]
	Data Min: 0 ~ Max: 64
	Refer to ‘Real data mapping 1’. See page 7.
		Acknowledgement [k][ ][Set ID][ ][OK][Data][x]
	11. OSD Select (Command2:l)
	To select OSD (On Screen Display) on/off when con-
	trolling remotely.
		Transmission [k][l][ ][Set ID][ ][Data][Cr]
	Data 0: OSD off
	Data 1: OSD on
		Acknowledgement [l][ ][Set ID][ ][OK][Data][x]
	12. Remote Control Lock Mode (Command2:m)
	To lock the remote control and the front panel
	controls on the set.
		Transmission [k][m][ ][Set ID][ ][Data][Cr]
	Data 0: Lock off		Data 1: Lock on
		Acknowledgement [m][ ][Set ID][ ][OK][Data][x]
	If you’re not using the remote control and front panel
	controls on the TV, use this mode. When main power
	is on/off, remote control lock is released.
	13. PIP / DW (Command2:n)
	To control the PIP (Picture In picture)/DW.
APPENDIX	You can also control the PIP/DW using the PIP but-
	Data 0:PIP/DW off		Data 1: PIP
	ton on the remote control or in the PIP/DW menu.
		Transmission [k][n][ ][Set ID][ ][Data][Cr]
	Data2: DW1 (option)		Data3: DW2
	Data5: POP (option)
		Acknowledgement [n][ ][Set ID][ ][OK][Data][x]

14. PIP Position (Command2:q)

To select sub picture position for PIP.

You can also adjust the sub picture position using

POSI-TION button on the remote control or in the

PIP/DW menu.

Transmission [k][q][ ][Set ID][ ][Data][Cr]

Data 0: Right down on screen

Data 1: Left down on screen

Data 2: Left up on screen

Data 3: Right up on screen

Acknowledgement [q][ ][Set ID][ ][OK][Data][x]

15.Balance (Command2:t) To adjust balance.

You can also adjust balance in the SOUND menu. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64

Refer to ‘Real data mapping 1’. See page 82. Acknowledgement [t][ ][Set ID][ ][OK][Data][x]

16.Color Temperature (Command2:u) To adjust color temperature.

You can also adjust CSM in the PICTURE menu.

Transmission [k][u][ ][Set ID][ ][Data][Cr]

Data 0: Cool 1: Normal 2: Warm 3: User

Acknowledgement [u][ ][Set ID][ ][OK][Data][x]

17.Red Adjustment (Command2:v)

To adjust red in colour temperature.

Transmission [k][v][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 50 (or 3C)

Refer to ‘Real data mapping 2’. See page 82.

Acknowledgement [v][ ][Set ID][ ][OK][Data][x]

18.Green Adjustment (Command2:w) To adjust red in colour temperature.

Transmission [k][w][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 50 (or 3C)

Refer to ‘Real data mapping 2’. See page 82. Acknowledgement [w][ ][Set ID][ ][OK][Data][x]

19.Blue Adjustment (Command2:$) To adjust red in colour temperature.

Transmission [k][$][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 50 (or 3C)

Refer to ‘Real data mapping 2’. See page 82.

Acknowledgement [$][ ][Set ID][ ][OK][Data][x]

80