[5.9] Testing with PING (BHT-7500S/7500W only)
TEST PING
1:RUN PING 2:SET PING
(1) PING screen
(No.-of-echo requests entry screen)
RUN PING
DESTINATION IP
XXX.XXX.XXX.XXX
DATA | SIZE | XXXXX | ||
INTERVAL | XXXXX | |||
TIMEOUT | XXXXX | |||
SEND | TYPE | TYPEn | ||
COUNT | [XXXXX |
|
| |
] | ||||
|
| ⇑ |
|
(PING running screen) | |||
|
|
| |
RUN PING | |||
|
| ||
DESTINATION IP |
| ||
|
| XXX.XXX.XXX.XXX | |
DATA SIZE | XXXXX | ||
INTERVAL | XXXXX | ||
TIMEOUT | XXXXX | ||
SEND TYPE | TYPEn | ||
|
| [XXXXX] | |
COUNT |
| ||
|
|
| |
|
|
| |
***** PING start ***** | |||
| : XXXXX [XXXXX] | ||
OK |
| ||
NG |
| : XXXXX | |
TIMEOUT : XXXXX | |||
|
| ***** | |
***** PING end | |||
|
|
|
|
Selecting "9:PING" on the TEST menu calls up the screen shown at left.
1 | RUN PING | : Runs PING. |
2 | SET PING | : Switches to the PING parameter |
|
| setting screen. |
Select a desired item by using the numerical keys
or 
and 
keys, and then press the ENT key.
To return to the TEST menu, press the C key.
Selecting "1:RUN PING" on the TEST PING menu calls up the screen shown at left where the current settings are displayed.
The COUNT entry box enclosed with brackets is ready to accept data. If you want to modify the number of echo requests displayed, enter the de- sired value by using the numerical keys.
To delete a single character, press the BS key ( SF
+C keys). To delete the whole entry you made, press the C key.
Press the ENT key to start PING.
Once PING starts running, the message shown at left will appear.
To stop PING, press the C key.
The PING result may include the following:
OK | : Displays the number of echo replies. |
| [XXXXX]: Echo reply time in millisec- |
| onds |
NG | : Displays the number of errors found |
| during execution of PING. |
TIMEOUT : Displays the number of timeouts (for echo replies) that took place during execution of PING.
86
