Denso BHT-7500W, BHT-7500S user manual Handling the battery cartridge

WARNING

Handling the battery cartridge

¥Never disassemble or heat the battery cartridge, nor put it into fire or water; doing so could cause battery-rupture or leakage of battery fluid, resulting in a fire or bodily injury.

¥Do not carry or store the battery car- tridge together with metallic ball-point pens, necklaces, coins, hairpins, etc.

Doing so could short-circuit the termi- nal pins, causing the batteries to rup- ture or the battery fluid to leak, result- ing in a fire or bodily injury.

Never

put me

into fire!

Do not

short-

circuit me!

¥Avoid dropping the battery cartridge or letting it undergo any shock or impact.

Doing so could cause the batteries to break, generate heat, rupture or burn.

¥Only use the dedicated charger (CU- 7001, C-700 or C-750) for charging the rechargeable battery cartridge.

Using a different type of charger could cause battery-rupture or leakage of bat- tery fluid and result in a fire, bodily in- jury, or serious damage to property.

Charge only

with the

dedicated

device.

Undedicated

¥Never charge the rechargeable battery cartridge where any inflam- mable gases may be emitted; doing so could cause fire.

Handling the BHT

¥The BHT uses a laser light for scanning bar codes. The intensity of the laser light might be too low to inflict bodily injury. However, do not look into the laser beam.

The BHT complies with Laser Safety Standard, Class II of 21 CFR Chapter 1, Subchapter J.

The BHT does not mount beam attenuator and laser radiation emis- sion indicator required by this standard. Instead, the software-con- trolled Magic keys (see Section 2.2 "Components and Functions") function as them because the laser light is not enabled without the Magic keys pressed.

v