Denso BHT-7500S, BHT-7500W user manual Abnormally turned off last, System Program malfunction

￿

Your terminal was ￿ not shut down￿ properly the last￿ time it was used.￿

￿

Unsaved data￿ was lost.￿

￿

[SF+2]

Abnormally turned off last

■Problem

After turned off abnormally*, the BHT had been left with no battery cartridge loaded or with a dis- charged battery cartridge loaded, so unsaved data was lost.

(*"Normally turned off" refers to turned-off with

the PW key or by the auto power-off feature.)

■Solution

Refer to Subsection 2.3.7 "BHT Turning-off Notes."

Reload the battery to restart!

XXXXXXXX01

Reload the battery to restart!

tskid:XXXXXXXX
ercd :XXXXXXXX	02
addr :XXXXXXXX

System Program malfunction

■Problem

During execution of System Program, the System Program has attempted to write onto the write-pro- tected area of the memory.

(xxxxxxxx: Error address)

If this error occurs, the BHT beeps five times (for 0.1 second per beep).

■Solution

Unload and reload the battery cartridge, then turn on the power.

■Problem

During execution of System Program, the System Program has received an invalid command code.

(xxxxxxxx: Error address)

If this error occurs, the BHT beeps five times (for 0.1 second per beep).

■Solution

Unload and reload the battery cartridge, then turn on the power.

148