SYSTEM MENU
1:EXECUTE PROGRAM 2:DOWNLOAD 3:UPLOAD
4:SET SYSTEM 5:TEST 6:VERSION 7:FTP
8:RF
("7:FTP" and "8:RF" supported by the
(1)While holding down the SF and 1 keys, press the PW key to start System Mode. The SYSTEM MENU shown at left will appear.
SET SYSTEM
1:EXECUTE PROGRAM
2:DISPLAY
3:DATE/TIME
4:BARCODE
5:COMMUNICATION
6:KEY
7:RESUME
8:TCP/IP
("8:TCP/IP" supported by the
SET DATE/TIME
00/01/01 00:00
_ / / | : |
(2)Press the 4 key to select the "SET SYSTEM" on the SYSTEM MENU and then press the ENT key, and the screen shown at left will appear.
(To return to the immediately preceding screen during this setting procedure, press the C key.)
(3)Press the 3 key on the SET SYSTEM screen to select the "DATE/TIME" and then press the ENT key, and the screen shown at left will appear.
(4)Use the numerical keys to enter the year (only the last two digits), month, day, hour, and minute in this order. If the data is in one digit, add a 0 (zero) preceding the data.
For the year, be sure to enter the last two digits of the year. For the hour, enter it in the
If any of the year, month, day, hour, and minute is not entered, the ENT key will be deactivated.
If you make a wrong entry, press the BS key
(SF + C keys) to delete it and then enter the correct data.
22
