Denso BHT-7500S, BHT-7500W user manual About $$BRKLST.SYS, If invalid files are found

[ 3 ] About "$$BRKLST.SYS"

If Scandisk finds an invalid file(s), it will automatically create the "$$BRKLST.SYS" file. To check the contents of the file, upload the file in System Mode to the host computer. (Refer to Subsection 2.5.3, "[ 3 ] Uploading.")

Contents of the "$$BRKLST.SYS" file

Records (1)	File name
(2)	Error factor	+ (Broken since the BHT has not been turned off
		normally)
		* (Broken due to any other causes)
(3)	Broken records	e.g. 01000-01200 (Data in records numbered 1000 to
		1200 is lost)
(Example)

SAMPLE1.DAT + 01000-01050 If more than one sequence of records is broken in

SAMPLE1.DAT + 01200-01250 a same file, they will be written into the

SAMPLE1.DAT + 01600-01650 subsequent records in the "$$BRKLST.SYS." SAMPLE2.DAT * 00250-00275

SAMPLE3.DAT * 00100-00150

↑	↑	↑
(1)	(2)	(3)

[ 4 ] If invalid files are found

Even invalid, files may be uploaded, so upload them to the host computer according to your needs.

After uploading,

-Delete those invalid files. (Refer to Subsection 2.5.3, "[ 9 ] Deleting Files.") or

-Download valid files having the same names as invalid files. (Refer to Subsection 2.5.3, "[ 2 ] Downloading.")

32