No execution program selected. Contact your
administrator.
Chapter 4. Error Messages
Execution program not selected
■Problem
No user program has been selected as an execu- tion program to be run when the power is turned on.
If this error occurs, the BHT beeps five times (for 0.1 second per beep) and then turns itself off.
■Solution
Run System Mode and select an execution pro- gram in the SET SYSTEM menu. (For the selecting procedure, refer to Chapter 2, Subsection 2.5.3, [4.1].)
Resume data lost
■Problem
No resume data has been retained since the BHT was not normally turned off and then left with no
No resume info. has been retained. Program restarts automatically.
battery cartridge loaded or with a discharged bat- tery cartridge loaded even if the resume function had been set to ON.
The BHT displays this error message for 3 seconds and automatically runs the execution program from the point of
Your settings in System Mode have been lost.
Will reset
to defaults.
Error in System Mode settings
■Problem
Your settings made in System Mode contain an er- ror.
• If this error occurs, the System Mode settings revert to the factory defaults.
•The BHT displays this error message for three seconds and then displays the "No execution program selected…" message.
