SET ID
1:DOMAIN 0
2:SECURITY ID
[DENSO WAVE | ] |
SET ID
1:DOMAIN 0
2:SECURITY ID
[********************]
Set up? 1:Yes 2:No
Chapter 2. Getting Started the BHT and System Mode
BHT-7500S
Shown at left is an entry sample screen where a security ID is DENSO WAVE.
After entry, press the ENT key. Instead of the "DENSO WAVE" entered, 20 asterisks will display.
Pressing the SF key switches the entry mode between the numeric mode (without a guidance) and alphabet mode.
In the entry mode, to delete a single character, press the BS key ( SF + C keys). To delete the whole entry you made, press the C key.
Pressing the C key when any item is highlighted
will display the confirmation message as shown at left.
To save the new entry, choose "1:Yes" and press
the ENT key. The "** Now Setting **" will appear
and the screen will return to the RF MENU.
To cancel the new entry, choose "2:No" and press the ENT key. The newly entered value will be discarded and the screen will return to the RF MENU.
When the "** Now Setting **" displays, the newly entered security ID will be written onto the EEPROM of the wireless module built in the
While this message is displayed, do not turn the BHT off. Writing halfway onto the EEPROM will not bring any assured settings.
Be sure to record your security ID. There is no way to read it out from the EEPROM of the wireless module.
As long as you do not set a new security ID, the previous setting will be retained.
When setting a security ID, pressing the ENT key without entering any character string will set a default value to the EEPROM of the wireless module.
97
