Denso BHT-7500W, BHT-7500S user manual Getting Started the BHT and System Mode

Chapter 2. Getting Started the BHT and System Mode

Data that can be copied from one BHT to another BHT

The copying function between BHTs copies the following set data:

LCD contrast level Beeper volume

Switching between beeper and vibrator

Execution program to be run automatically when the BHT is turned on Message version (English or Japanese)

Display font size

Date

Time

Setting of black-and-white inverted label reading function

Decode level

Minimum number of digits to be read for ITF

Minimum number of digits to be read for STF

Minimum number of digits to be read for Codabar (NW-7)

Interface port to be used in user programs

Interface port to be used in System Mode

Communications parameters for the optical interface

Communications parameters for the direct-connect interface

Communications protocol options for the optical interface

Communications protocol options for the direct-connect interface

Communications protocol type

Shift key function defined

M1 key function defined

M2 key function defined

M3 key function defined

M4 key function defined

Resume function

IP address of FTP server

User name of FTP server

Password of FTP server

Default directory for FTP server

FTP option, Line delimiters (CR/LF)

FTP option, Treatment of line delimiters

FTP option, Treatment of trailing spaces in data filelds

FTP option, Upload mode

FTP option, Verbose mode

IP address of host computer for ping

Data size of echo request

Echo request intervals

Timeout period for echo request

No. of echo requests to be sent

Echo request send timing

Setting of remote wakeup

Transmission speed for remote wakeup

CPU performance

Domain	BHT-7500S only
Security ID	BHT-7500S only
Service Set ID (SSID)	BHT-7500W only
Power save mode for wireless module	BHT-7500W only
Authentication system	BHT-7500W only
WEP (Wired Equivalent Privacy)	BHT-7500W only

47