Denso BHT-7500W, BHT-7500S user manual Uploading, ONE File, ALL Files

[ 3 ] Uploading

UPLOAD￿

￿

￿ ￿

1:ONE FILE￿

￿

2:ALL FILES￿

￿

3:HT<-->HT COPY

UPLOAD FILE

SAMPLE01.PD3

SAMPLE02.PD3

SAMPLE03.PD3

SAMPLE04.PD3

SAMPLE05.PD3

SAMPLE06.PD3

SAMPLE07.PD3

SAMPLE08.PD3

SAMPLE09.PD3

SAMPLE10.PD3

SAMPLE11.PD3

SAMPLE12.PD3

SAMPLE13.PD3

SAMPLE14.PD3

SAMPLE15.PD3

SAMPLE16.PD3

Chapter 2. Getting Started the BHT and System Mode

Selecting "3: UPLOAD" on the SYSTEM MENU calls up the screen shown at left.

1	ONE FILE	: Uploads a user program file
		or data file stored in the
		memory.
2	ALL FILES	: Uploads all user program
		files (object programs) and
		all data files stored in the
		memory.

3HT<-->HT COPY : Uploads all of the files, sys- tem parameters, and calen- dar clock data stored in the BHT, to another BHT.

This function enables copy- ing between the BHTs. At the receiving BHT, select "2: DOWNLOAD" and "2: HT<-- >HT COPY" in System Mode.

For the preparation to be made preceding the start of this function, refer to NOTE given on page 46.

Select a desired item by using the numerical keys

or and keys, and the selected item becomes highlighted. Then press the ENT key.

To return to the SYSTEM MENU, press the C key.

If you select "1:ONE FILE" on the UPLOAD menu, the file selection screen as shown at left will ap- pear, listing all of the program files and data files stored in the memory. Select a file(s) you want to upload and press the ENT key.

If you select "2:ALL FILES" or "3:HT<-->HT COPY" on the UPLOAD menu, the "ALL" or "HT<-->HT" will appear in the center of the 2nd line, respectively.

51