TEST COMMUNICATION
< OPTICAL >
** Test OK **
Upon normal completion of the test, the tested slave BHT beeps once and shows the screen at left.
Press the C key to return to the TEST COMMUNI- CATION menu.
The master BHT will automatically return to the TEST COMMUNICATION menu.
Testing the direct-connect interface port
TEST COMMUNICATION
< CONNECTOR >
** Testing **
Selecting the "2:CONNECTOR" on the TEST COM- MUNICATION menu displays the screen shown at left and then starts testing the
TEST COMMUNICATION
< CONNECTOR >
** Test NG **
(XX)
If any error occurs, the BHT beeps three times and shows the screen at left.
In parentheses are error codes which have the following meanings:
(X X)
1: The received data is different from the sent data.
2:A timeout has occurred during standby for data reception.
1:300 bps
2:115200 bps
Press the C key to return to the TEST COMMUNI- CATION menu.
80
