Denso BHT-7500S, BHT-7500W user manual JIS Level 1 and Level 2 Font Files, User Programs

System Mode

System Mode is a system program exclusively designed for the effective use of user

programs in the BHT. It sets up the execution environments for those programs; e.g.,

it prepares downloading/uploading conditions, sets the calendar clock, and tests the

BHT components including the LCD, beeper, and keypad. Shown below is the System

Mode menu (SYSTEM MENU).

SYSTEM MENU

1:EXECUTE PROGRAM 2:DOWNLOAD 3:UPLOAD

4:SET SYSTEM 5:TEST 6:VERSION 7:FTP

8:RF

("7:FTP" and "8:RF" supported by the BHT-7500S/7500W only)

■JIS Level 1 and Level 2 Font Files

These files contain font data required for displaying Kanji characters on the LCD.

The BHT can display the Kanji characters not only in the conventional standard-size font (16 dots wide by 16 dots high) but also in the small-size font (12 dots wide by 12 dots high) in application programs. It can also display the double-width Kanji charac- ters of those 16-dot and 12-dot fonts in application programs.

If you do not need to display Kanji characters, you may delete these JIS font files. After deletion, the memory area which was occupied by these files can be used as a user area. For the deleting procedure, refer to Section 2.4, "Initializing the BHT System" or Subsection 2.5.3, "[ 9 ] Deleting Files."

The names of the JIS font files are:

FNT16J1.FN3	(JIS Level 1 font, 16-dot)
FNT16J2.FN3	(JIS Level 2 font, 16-dot)
FNT12J1.FN3	(JIS Level 1 font, 12-dot)
FNT12J2.FN3	(JIS Level 2 font, 12-dot)

■User Programs

You can develop application programs to meet individual job requirements by using the BHT-BASIC Compiler. To download those user programs to the BHT, use Ir- Transfer Utility C/Ir-Transfer Utility E/Transfer Utility.

14