Kodak 560, 750 manual Navitar Dissolve Interface MDC200, General Components Specifications Features

Navitar Dissolve Interface MDC200

General

Components

Specifications

Features

The dissolve interface receives signals from an AVL/Dataton Dissolve Controller and controls three (3) 560DM/750DM Series Xenon Slide Projectors.

Component	Description	Quantity	Weight
MDC200	12.7”W x 13.2”D x 3.7”H	1 each	17 lbs.
	324W x 335D x 94H (mm)		(7 Kg.)
Connection Cord	Length 9’	3 each
Power Cord	Length 16’	1 each

Power Supply	115V 50/60HZ standard (220V available,
	to be specified when order is placed)
Power Consumption	120VA
Ambient Temperature	5-35ºC
Use	Continuous use possible
Dimensions	12”W x 13.2”D x 3.7”H
	(324mmW x 335mmD x 94mmH)
Weight	15 lbs.
Color	Black

Power Switch

The main power switch for this unit. When the switch is turned on, the internal lamp lights.

Set-Up Switch

Turn the three set-up switches to the ON position (switch is pushed in) and the shutter of the dissolve module on the 560DM/750DM Xenon Slide Projector will open. This will be useful for adjusting pictures on the screen before the slide show. When the show is ready to start, turn the three set-up switches to the OFF position. When the switch is turned on, or when the SHUTTER OPEN signal is sent from a dissolve controller, the LED is lit in this switch.

Set-up Switch(3)

	NAVITAR MDC 200
	POWER
		ON
Power Switch				SET UP
			A B C
		OFF

35