Features
Forward/Reverse Transfer Switch
Located on the rear part of the projector, it moves the slide tray forward and reverse.
Power Connector
Connects the main power cable.
When lit, it indicates that the slide tray is at the
Adjustable Screw Legs
The projected image can be positioned on screen by adjusting the four legs on the projector base. (Legs should be adjusted as far in as possible when shipping to avoid damage.)
Slide Gate
Loads each slide into the projector from the slide tray.
Projection Lens
A wide variety of Navitar slide projection lenses are available for use with your Xenon projector. A large diameter lens, such as those offered by Navitar, will allow you to output more light from the Xenon projector’s lamp house. Conversely, using a low cost, plastic slide lens of a smaller optical diameter may prevent you from achieving maximum brightness
Auto Focus Switch
Turns the automatic focusing of slides on/off.
7
