Units with Dissolve Module & Dissolve Interface
The shutter blades can be opened automatically by turning the three set- up switches on the dissolve interface box to the ON position. Remember to return these three switches to the OFF position to permit the dissolve equipment to operate the shutter during your multimedia show.
Connect the dissolve equipment (AVL/Dataton/etc.) to the dissolve interface unit. The dissolve interface will appear as a simulated projector to the dissolve controller while it converts the signals from the dissolve controller to operate the Xenon projector dissolve mechanism.
Dissolve Shutter Manual Knob
Dissolve Interface Connector Terminal
Dissolve Shutter
Manual Knob
Adjuster (Open)
Adjuster (Closed)
Screws
Dissolve Interface
Connector Terminal
Adjusting Dissolve Shutter Open/Close
(For the dissolve module of the 560DM/750DM projector.) Plug in the AVL Dove X2 or Dataton PAX Dissolve Controller, as well as the Navitar Dissolve Interface unit.
6 mm
8 mm
8 mm
6 mm
22
