Changing the default setting of the amplifier

HT-X1W

ENGLISH

Changing the default setting of the amplifier

Advanced Features

E-51

Change settings according to the connected speakers.

Speaker delay setting (See page 52.)

Speaker level setting (See page 53.)

Test tone (See page 53.)

Example:

If the right surround speaker is 3.3 m (10 feet) away from the listen- ing position, change settings as shown below (adjust the SR).

CT

 

 

CT

 

FL

FR

 

FL

FR

SW

 

SW

 

 

SL

SR

SL

3.3 m

 

(10 feet)

SR

 

 

 

Default setting: 2 m (6 feet)

1In "Speaker delay setting", set the right surround speaker (SR) to 3.3 m (10 feet).

2In "Speaker level setting", slightly increase the level of the right surround speaker as it is a little farther than others (see page 53).

3In "Test tone", check the sound from each speaker (see page 53).

If you press during the operation, you can go back one step.

 

Speaker type

Delay range

Level range

 

 

 

 

 

 

FL

Front speaker (Left)

0.1 to 9.0 m

- 6 dB to + 6 dB

 

 

 

 

 

 

CT

Centre speaker

0.1 to 9.0 m

- 6 dB to + 6 dB

 

 

 

 

 

 

FR

Front speaker (Right)

0.1 to 9.0 m

- 6 dB to + 6 dB

 

 

 

 

 

 

SR

Surround speaker (Right)

0.1 to 9.0 m

- 6 dB to + 6 dB

 

 

 

 

 

 

SL

Surround speaker (Left)

0.1 to 9.0 m

- 6 dB to + 6 dB

 

 

 

 

 

 

SW

Subwoofer/amplifier unit

 

 

 

- 10 dB to + 10 dB

 

 

 

 

 

 

 

 

 

Default settings:

Delay - - - 2 m (6 feet)

Level - - - 0 dB (FL, CT, FR, SR, SL), + 5 dB (SW)

05/2/2

HT-X1W(LA)E6.fm

TINSZA048AWZZ

Page 52
Image 52
Sharp HT-X1W operation manual Changing the default setting of the amplifier, E-51, Advanced Features