Sharp HT-X1W Remote control, E-23, Battery installation, Test of the remote control

HT-X1W

Remote control

ENGLISH

Preparation for Use

!Battery installation

1Remove the battery cover.

2Insert the supplied batteries according to the direction indi- cated in the battery compartment.

When inserting or removing the batteries, push them toward the

battery terminals.

3Replace the cover.

Precautions for battery use:

"Replace all old batteries with new ones at the same time.

"Do not mix old and new batteries.

"Remove the batteries if the system will not be used for long peri- ods of time. This will prevent potential damage due to battery leakage.

Caution:

"Do not use rechargeable batteries (nickel-cadmium battery, etc.).

"Installing the batteries incorrectly may cause the system to mal- function.

Battery removal:

Remove the battery cover. Push each battery toward the battery terminal and take them out.

Notes concerning use:

"Replace the batteries if the operating distance is reduced or if the operation becomes erratic. Purchase 2 "AAA" size batteries (UM- 4, R03, HP-16 or similar).

"Periodically clean the transmitter on the remote control and the sensor on the main unit with a soft cloth.

"Exposing the sensor on the main unit to strong light may interfere with operation. Change the lighting or the direction of the main unit if this occurs.

"Keep the remote control away from moisture, heat, shock, and vibrations.

!Test of the remote control

Check the remote control after checking all the connections (see pages 16 - 22).

Point the remote control directly at the remote sensor on the main unit.

The remote control can be used within the range shown below: Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy music.

"The main unit is equipped with 2 remote sensors. Use them according to the installation method as shown below.

Main unit Remote sensor

0.2 m - 6 m (8" - 20')

E-23

05/2/2 HT-X1W(LA)E3.fm TINSZA048AWZZ