Meridian America DSP33 manual Start volume

Configuring the DSP33 loudspeakers using a computer

For best results with a Meridian D1500 or D2500 subwoofer choose Free, Boundary, or Corner as appropriate.

If you have specified the Speaker Use as Centre you can apply a Centre Speaker tilt offset, which is added to the Tilt value for the selected source.

The recommended setting is -1dB when the speaker is positioned above a television.

Start volume

The Start volume setting determines the volume selected on coming out of standby.

●Set the Start volume to 65 to leave the volume unchanged (as on other Meridian products).

●Set the Start volume to a value other than 65 to set the volume to that value.

Advanced options

The Advanced options are described in the following table:

Option	What it means
Volume control	Specifies whether the DSP33
	provides volume control for the
	system. Choose Main if the DSP33 is
	in the main room, Secondary if the
	DSP33 is used in a second room, or
	None if the DSP33 is in the second or
	third room of a three-room system.
Comms controller	Specifies whether the DSP33 is
status	controller, not controller, or set
	automatically.
System address	For multi-room setups.

30