Meridian America DSP33 manual Meridian Configuration program, Requirements

The Meridian Configuration program

using a computer

The Meridian Configuration program is a stand-alone Windows- based application that lets you design your own configuration of the DSP33 Digital Loudspeaker System to suit your own personal preferences and the particular configuration of equipment in your system.

The Meridian Configuration program provides the following sections to allow you to control the corresponding aspects of the speaker’s operation:

Requirements

To use the Meridian Configuration program you need:

❍A computer running Windows 95, Windows 98, or Windows NT 4.00.

❍A 100MHz or faster Pentium-class processor.

❍At least 16Mbytes of RAM.

❍5Mbytes of free disk space.

❍A vacant 9-pin serial port assigned to one of COM1 to 4.

Configuring the DSP33 loudspeakers

Setup

Lets you specify general features of the multimedia controller’s operation, including the operation of the volume control and menus, and settings affecting its operation in multi-room systems.

Sources

Lets you customise the operation of each of the sources, including the audio input used for the source, and additional information about the type of each source.

The software requires a mouse or similar pointing device – it cannot be operated solely from the keyboard.

To install the Meridian Configuration program

●Insert the first Meridian Configuration program installation disk.

●Choose Run... from the Start menu.

●Type A: setup and press R.

●Follow the on-screen instructions, inserting the second installation disk when prompted.

24