Adjusting the volume
The digital loudspeakers adjust the volume in precise steps of 1dB, where 9dB is equivalent to doubling the loudness, and can be varied in the range 1 to 99dB.
When you first connect power to the digital loudspeakers the volume is set to 65, which is similar to the midway position of the rotary volume control on a conventional preamplifier.
To restore the sound
●Press Mute again on the remote.
Alternatively, the sound will be restored if you adjust the volume.
The back panel indicator on each speaker will go bright.
Using
To change the volume
●Press the red A or V keys on the remote.
To mute the sound
●Press Mute on the remote.
When the sound is muted the back panel indicator on each speaker is dimmed.
the DSP33 Digital Loudspeaker System
21
