❍Ensure that the receiver uses
❍Relocate the receiver with respect to the DSP33.
❍Connect the receiver and this product to different AC outlets.
❍If the problem persists contact your dealer.
Centre not working
There may be a connection problem.
❍Check that the channel switch is set to LEFT/CENTRE.
Configuring the DSP33 does not have any effect
Make sure that you are configuring the DSP33 used as the master digital loudspeaker in the system. This determines the configuration of all digital loudspeakers in the system.
Green indicator on back panel is flashing
This normally indicates that the DSP33 is overheating, and that it has shut down to cool down. If the DSP33 is cold, it may indicate a fault.
Meridian Configuration program repeatedly fails to talk to the loudspeaker
❍Check that you have selected a COMMS port.
❍Check that no other program currently running is using the COMMS port.
❍Check that it is connected correctly.
❍Turn off the DSP33 for a few seconds and turn back on, then retry.
❍Quit from all other programs and retry.
❍Reboot the computer and retry.
❍Ensure you are using the serial lead supplied with the product, or a null modem cable.
❍If you are using a laptop try turning off the screensaver or power management software.
Unit stays in standby – light is dim
❍Check that it is connected correctly.
❍Turn the system on from another Meridian product in the system.
Troubleshooting
37
