Connecting the loudspeakers
Back panel
The following diagram gives details of the rear panel
connections:
DIGITAL | MERIDIAN COMMS | RS232 | |
INPUT OUTPUT | OUTPUT | INPUT |
|
1 |
|
|
|
2 |
|
|
|
|
| CHANNEL |
|
|
| LEFT/ | RIGHT |
|
| CENTRE |
|
OFF
ON
Connections
Omnimount wall bracket fixing holes
Power input
Fuse
Digital | Digital | Comms | Channel | PC |
inputs | output | selection | ||
DIGITAL | MERIDIAN COMMS | RS232 |
| |
INPUT OUTPUT | OUTPUT | INPUT |
| |
|
| |||
1 |
|
|
|
|
2 |
|
|
|
|
|
| CHANNEL |
|
|
| LEFT/ | RIGHT |
| |
| CENTRE |
| ||
|
|
| ||
To reset the configuration of the digital loudspeaker
The following procedure can be used to reset the configuration of the DSP33 loudspeaker to the default settings, without needing a computer, using the R reset plug supplied.
●Unplug the COMMS connections.
●Plug the R reset plug into the COMMS input socket.
●Switch the loudspeaker off, and then on again.
●Replace the original COMMS connection.
Setting up the DSP33 Digital Loudspeaker System
13
