Only the master loudspeaker plays | Meridian America DSP33 specs

Only the master loudspeaker plays

❍Check the S5 cables are connected correctly.

Sound is odd or mono

❍Check the channel selector switches on both loudspeakers are correctly set.

Troubleshooting

38

Image 43

Meridian America DSP33 manual Only the master loudspeaker plays, Sound is odd or mono

Contents

Meridian DSP33 Digital Loudspeaker System Meridian DSP33 Digital Loudspeaker System User Guide Sales and service in the UK Contents Troubleshooting Configuring the DSP33 Loudspeakers using a Computer Introduction DSP33 Digital Loudspeaker System Digital Signal ProcessingDSP33 drivers Mounting options Power amplifiersMeridian High Resolution MHR Cabinet Meridian Comms Meridian Digital Compact Theatre Sample configurations Other applications DSP33 Digital Loudspeaker System Specification Specification and accessories Available accessories Setting up the DSP33 Digital Loudspeaker System Radio interference Unpacking To avoid overheating Safety warningsPositioning the digital loudspeakers To position the digital loudspeakers To wall mount the digital loudspeakers To obtain the best sound To reset the configuration of the digital loudspeaker Connecting the loudspeakersBack panel Communications connections Digital connections To connect two DSP33 loudspeakers in a Meridian system Connecting the digital loudspeakersTo use a DSP33 loudspeaker as a centre speaker Digital Loudspeaker System Loudspeaker System To use the DSP33 as a multimedia speaker with a PC Using the DSP33 Digital Loudspeaker System Selecting a source To switch to standbyTo select a source Adjusting the volume To change the balance Adjusting the balance or phaseTo reset the balance to the centre To change the phase Configuring the DSP33 loudspeakers using a computer To install the Meridian Configuration program Meridian Configuration programRequirements Program Running the Meridian Configuration program To connect the serial cable To select which loudspeaker to configure Creating a new settings file To display or edit the settings To display the settings To change the setup options Changing the setup options Start volume To set up sources Setting up sourcesTo configure the source options Loudspeakers using Advanced To save the current settings Completing the configurationTo store the settings to the DSP33 loudspeaker Troubleshooting Troubleshooting Unit stays in standby light is dim Configuring the DSP33 does not have any effectGreen indicator on back panel is flashing Centre not working Sound is odd or mono Only the master loudspeaker plays Service Service and guaranteeGuarantee Troubleshooting Index Index