!Audio Signal/Speaker Indicators
Audio signal indicators light up for the corresponding audio source, and speaker indicators are illuminated according to signals sent to the speakers.
|
|
|
|
|
|
| (1) (2) | (3)(4) (5) | (6) | |||||
Audio signal indicator |
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
| (7) |
|
|
|
|
| (8) | ||||
|
|
| Speaker | indicator |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| (9) (10) |
|
| (12) | (13) | |||
|
|
|
|
|
|
| (11) | |||||||
Example:
When 2.1 channel audio signals (L, R, LFE) are received, the audio signal indicators "L", "R" and "LFE" light up.
The illustration below indicates that 2 channel stereo sound (L and R) is reproduced.
L, R, LFE: Incoming audio signals
When Dolby Pro Logic 
is activated
2 channel stereo sound is converted to 5.1 channel surround sound, and all the speaker indicators "
" light up.
"
" appears when the speakers are receiving audio signals.
Audio Signal/Speaker Indicators:
(1)Left Front Speaker Indicator
(2)Left Indicator
(3)Centre Indicator
(4)Centre Speaker Indicator
(5)Right Indicator
(6)Right Front Speaker Indicator
(7)Low Frequency Effect Indicator
(8)Surround Monaural Signal Indicator
(Lights up when the surround speakers receive monaural sig-
nals.)
(9)Left Surround Speaker Indicator
(10)Left Surround Indicator
(11)Subwoofer Indicator
(12)Right Surround Indicator
(13)Right Surround Speaker Indicator
Notes:
"You can switch the audio output when the disc contains sounds of multiple audio formats (Dolby Digital, DTS, etc.). See page 31.
"Sound may not be produced from the subwoofer/amplifier unit depending on the disc.
"You cannot change the multi channel mode or stereo mode whilst listening to the radio.
"If sound is unpleasant to listen to, change the multi channel mode or stereo mode.
"Settings for the multi channel mode and stereo mode are retained by input (DVD, AUX DIGITAL and AUX ANALOG).
ENGLISH
Advanced Features
7
E-48
05/2/2 | TINSZA048AWZZ |
