Denso BHT-7500W, BHT-7500S user manual Setting Transmit KEY

Setting TRANSMIT KEY

SET TRANSMIT KEY

1:TRANSMIT KEY

KEY1 KEY2

KEY3 KEY4

SET TRANSMIT KEY

1:TRANSMIT KEY

KEY1 KEY2

KEY3 KEY4

Set up?

1:Yes 2:No

Chapter 2. Getting Started the BHT and System Mode

BHT-7500W

Selecting the "5:TRANSMIT KEY" on the WEP KEY definition screen displays the "** Now Loading **." After that, the screen shown at left will ap- pear.

Select a desired item by using the numerical keys

or and keys.

For details about the TRANSMIT KEY, refer to Sub- section 3.1.2.

Pressing the C key will display the confirmation screen as shown at left.

To save the new entry, choose "1:Yes" and press the ENT key. The "** Now Setting **" will appear and the screen will return to the WEP KEY defini- tion screen.

To cancel the new entry, choose "2:No" and press the ENT key. The newly entered data will be

discarded and the screen will return to the WEP KEY definition screen.

When the "** Now Setting **" is displayed, the new entry will be written onto the EEPROM of the wireless module built in the BHT-7500W.

While this message is displayed, do not turn the BHT off. Writing halfway onto the EEPROM will not bring any assured settings.

105