Esoteric I-03 owner manual Identifying the Parts Remote Control Unit

Identifying the Parts (Remote Control Unit)

a
	e
b	f
c
d	g

To simplify explanations, instructions in this manual might refer to the main unit or remote control unit only. In such cases, the same controls on the remote control and main unit will operate similarly.

The buttons not mentioned in this chapter do not work with the I-03. However, they can be used for other Esoteric products.

aON (confirm settings)

Some settings can be changed using this button in “Additional settings” (pages 16, 18).

You can also assign names to the terminals using this button (page 18).

oYou can not turn the power on or off using this button.

bINPUT (</>)

Press these buttons to select a source. Select the input terminal that is connected to the device that you want to play (page 12).

In setup mode, press these buttons to change the setting of each item (pages 14, 15).

cDIMMER

Use this button to select one of four brightness levels for the display and indicator lamps (page 13).

dSETUP

Press this button to enter the setup mode for balance and output level adjustments (page 14).

Press this button for more than 2 seconds to enter additional setup modes (page 15).

eCLEAR

In setup mode, use this button to exit the setup mode (pages 14, 15).

fVOLUME (+/−)

Use these buttons to adjust the volume.

o When you set the RCA2 terminals to “THRU” (page 16), or when you set the PRE OUT terminals to “REC” (page 16), the VOLUME control buttons do not work.

gMUTING

Press this button to mute the sound. Press this button again to restore the sound (page 13).

6