Notes
•Charge the battery when using this camera for the first time. To charge the battery, load them in the battery compartment of this camera. It takes approximately 4 hours to complete charging.
•When loading the battery after incorrectly terminating the camera, the camera may not be correctly initiated. If this happens, turn the power off, then turn it on again.
•The battery must be charged when the ambient temperature is in the range from +50°F (+10°C) to +86°F (+30°C).
Battery Wear
When the power is turned on, the camera shows the remaining battery power on the LCD monitor.
Display
Meaning Sufficient amount left | Fairly consumed | Nearly exhausted | Completely exhausted |
About battery wear
The battery wear may vary depending on length of storage since manufacture of the battery, temperature of the camera and battery, and operating condition such as flash. Moreover, if the polarities of the battery (+ or
When using the supplied
Conditions: +77°F (+25°C), Flash use rate 100%
Photography interval: 1 frame every 30 seconds
Possible number of shots: 120 shots
* The number of frames shown above is a reference value.
Using the battery efficiently
•This camera consumes electricity even with the power off while the amount is extremely small. We therefore recommend that the battery be removed when not using the camera for a long period of time. If the camera is left without battery about a week, the date, time and other settings may be reset to the factory defaults. If this happens, set the correct date and time again before using the camera.
•When using the camera in cold areas, keep the camera and battery warm by holding them inside your outer cloth.
Battery performance lowered through low temperature will return to normal when a normal temperature is restored (+77°F (+25°C)).
GettingReady | |
| TakingPhotographs |
PhotographedImages | PlayingBack/Deleting |
PC | Connecting |
| tothe |
Information | OtherUseful |
21
