Suunto manual Replacing the battery of the Suunto t1

5.4.1. Replacing the battery of the Suunto t1

To replace the battery:

1.Use a coin to open the battery compartment on the back of your Suunto t1. Ensure that the O ring and all surfaces are clean and dry.

2.Remove the old battery.

3.Place the new battery into the battery compartment with the positive side facing up.

4.Slide the battery gently against the contact plate on the side, ensuring that it does not break or bend out of place.

5.When replacing the cover, rotate it carefully counter-clockwise with your thumb in order to align the threads. The cover should rotate easily at first without having to use force. If you have to use force right at the start, the threads are misaligned and the threads may be damaged.

6.Perform the final tightening with a suitably sized coin.

NOTE	The markings on the cover may be left unaligned once the cover has been
	tightened. If the old cover is undamaged, it does not need to be replaced.
NOTE	If the threads of the battery compartment cover are damaged, please send
	your device to an authorized Suunto representative for service.

27