Handling the SD Card Correctly

In this Instruction Manual, the SD memory card is called an SD card. Read and observe the following when handling the supplied SD card.

Cautions

The SD card includes a non-volatile semiconductor memory (NAND Flash EEP-ROM). Under normal use data saved in the SD card is not damaged or lost. If used improperly, however, the data may be damaged or lost. Please be aware that Toshiba Corporation will accept no responsibility whatsoever for damaged or lost data, regardless of the type or cause of the problem or damage.

The SD card uses part of the memory as its system area. The actually usable memory capacity is therefore lower than the indicated capacity.

The supplied SD card has been already formatted for image storage. Always use this camera when reformatting the card to erase images or folders. Formatting the SD card on other devices (PC, etc.) may result in problems such as inability to read or write data.

We strongly recommend that you make backups of important data.

When the SD card comes to the end of its life, it does not allow image data to be written or deleted. If this happens, purchase a new SD card.

Getting Ready

Taking Photographs

Write Protection

To prevent valuable data from being erased accidentally, switch the write protect tab at the side of the SD card to “LOCK.” To save, edit, or erase data in the card, cancel the write protection state.

LOCK

LOCK

ImagesPhotographed

PlayingBack/Deleting

Write protection

Write protection

tab

state

 

 

Specifications

Memory type

: NAND Flash memory

Operating temperature

: +32°F (0°C) to +131°F (+55°C)

Storage temperature

: –4°F (–20°C) to +149°F (+65°C)

Operating/Storage humidity

: 30% to 80% (no condensation)

Dimensions

: 24.0 mm x 32.0 mm x 2.1 mm (W x H x D)

Weight

: Approx. 2g

PC

Connecting

 

tothe

Information

OtherUseful

13

Page 13
Image 13
Toshiba PDR-T20 instruction manual Write Protection, Write protection, State