Inserting and Removing the SD Card

Getting Ready

Images photographed with this camera will be stored in the SD card. Without inserting the SD card, you cannot take photographs using the camera.

Before starting

Before inserting or removing the SD card, make sure that the power to the camera is off.

PhotographsTaking

Back/DeletingPlaying ImagesPhotographed

Open the battery/SD card cover.

Slide the battery/SD card cover in the arrow

1direction 1, then open it 2.

2

Insert the SD card in the correct orientation shown.

Hold the SD card with its metal surface facing the touch panel side, then insert the card as far as it can go.

Connectingtothe

PC

OtherUseful

Information

Close the battery/SD card cover.

2

Close the battery/SD card cover 1, then slide it in

the arrow direction 2.

 

 

Make sure that the cover is firmly closed.

 

1

To remove the SD card

Open the battery/SD card cover, push the card once so that the card is slightly ejected, then remove the card slowly.

Important

Never open the battery/SD card cover or remove the battery while the SD card is being recorded (the indicator is lit red). Neglecting this could damage the SD card or the data in the SD card.

An SD card used with another model or device cannot be used with this camera as it is. Reformat it before taking photographs. See page 48.

This camera is incompatible with the MultiMediaCardTM.

18

Page 18
Image 18
Toshiba PDR-T20 Open the battery/SD card cover, Insert the SD card in the correct orientation shown, Before starting