RP2415 EN 6/15/01 4:48 PM Page 6
Before
you
begin
Before
you
begin
Back
CONTROLS
interac | ti | 3 | display |
ve mp |
|
|
| 1 |
| MODE |
|
5 | DSP | STOP |
|
|
PAGE | 11 |
4.5V |
IN |
DC |
PHONES LINE OUT |
2
3
Model | Transformer | EN |
Batteries | ||
RP2415 | 120V,60Hz | AA (LR6) x 4 (not included) |
| (Canada - included) |
|
| (U.S. - included) |
|
HOLD 
13
F.REW. | F.FWD |
| PLAY/ PAUSE |
6
7
8
10
9
/ |
|
VOLUME | SCROLL |
PERSONAL MP3 / CD PLAYER
4
Power Supply Requirements
You can power your CD player with an AC/DC transformer. Refer to the table for details on operating voltages for the trans- former.
AC/DC transformer is for indoor use only where the condition is dry. The jack must
Battery Level
Refer to the power level indicator on display for battery level. Replace with new batteries when the indicator is empty.
Car (DC) Power Supply
| Front |
| Side |
OPEN | 12 |
be disconnected from the device in order for it to be battery operated.
Note : Power is fed to the unit even when it is not functioning. To cut the power sup-
Adaptor
Plug the car (DC) power supply adaptor into the DC in 8V jack at the rear/side of the CD player & then into the cigarette
1. | Display |
2. | DC IN - insert the transformer plug |
8. PLAY / PAUSE - to play, or pause |
playback and confirm menu selections. |
ply , the AC/DC transformer must be unplugged.
lighter receptacle in your car.
here for indoor use or battery recharg- | |
ing. | |
3. | PHONES LINE OUT - insert head- |
phones or line out cord here. | |
4. | VOLUME / SCROLL - to adjust sound |
volume and scroll up / down menus. | |
5. | MODE - to select playback mode for |
repeat, shuffle and playlist functions. | |
6. DSP - to select enhanced sound | |
modes. | |
7. | F. REW. - for backward track skip, |
track quick scan and returning to previ- | |
ous menu. | |
9. F. FWD - for forward track skip, track |
quick scan and entering into folders & |
menus. |
10. STOP - to stop playback and turn off |
the unit. |
11. PAGE - to skip to next menu page. |
12. OPEN - slide rightward to open the |
disc compartment. |
13. CONTROLS HOLD - Slide rightward |
to avoid accidental activation of but- |
tons. Slide left for normal operation. |
Batteries Power Supply
Refer to the table for details on batteries required to operate your unit. To insert batteries, slide and then lift open the bat- tery compartment door. Insert 4 AA(LR6) batteries with polarities corresponding to indications on the compartment.
Loading a Disc
1.Slide lid OPEN latch to the right to open the disc compartment.
2.Insert a disc with label side up and press lightly on the center so that it fits onto the hub.
3.Close the disc compartment.
3 | 4 |
