Charging the Battery

GettingReady

TakingPhotographs

 

PlayingBack/Deleting

PhotographedImages

Connectingtothe

PC

OtherUseful

Information

You may also use the AC adapter when using the camera indoors for a long period of time or when transferring images to a personal computer, for example.

Before starting

Confirm that the power to the camera is off and then load the battery.

1 3

2

Insert the plug from the adapter into the DC IN 5V terminal.

Insert the appropriate end of the AC cable into the AC adapter.

Insert the AC plug on the AC cable to an AC wall outlet.

The indicator lights red when charging is started and turns green when charging is completed. It blinks red when a charging error occurs.

Important

If any problem occurs during charging, remove the battery from the camera.

Before connecting or disconnecting the AC adapter, make sure to turn the camera off. Neglecting this could cause malfunction and/or damage the saved image data even with the battery loaded.

When using the AC adapter after incorrectly terminating the camera, the camera may not be correctly initiated. If this happens, turn the power off, then turn it on again.

If the camera has been used at high temperatures, for example, under the blazing sun, charging may not start immediately because heat piled up inside the camera causes the internal sensor to operate. If this happens, wait until the camera cools off and then perform charging.

20

Page 20
Image 20
Toshiba PDR-T20 instruction manual Charging the Battery