Using the iP56
Charging & Playing iPhone and iPod |
|
The iP56 has a retracting dock to play and charge your iPhone or iPod while connected |
|
to AC power (it will ALSO charge when operating on the internal rechargeable battery |
|
and iP56 is powered on). The dock will charge your iPhone or iPod until completely |
|
charged then stop charging. |
|
1. Make sure the unit is connected to a working power source (AC adaptor is connected |
|
or internal battery is charged). |
|
2. Press on the iHome name below the dock to release and access the dock (press |
|
back into unit when not in use). |
|
3. Gently press your iPhone or iPod onto the dock. Do not force or use undue pressure. | Dock Release |
Make sure your iPhone or iPod is not in a case or “skin”. |
|
4.Press the Button located on top of the iP56 to turn the unit on. Place your iPhone or iPod in play mode. Press the or Buttons located on top of the unit to adjust the system volume. Press the SRS™ Button for enhanced bass response.
Note: Docking an already playing iPhone or iPod will also turn the iP56 on.
Charging the Internal Battery
The iP56 has an internal rechargeable lithium ion battery. The battery condition indicator is located on top of the unit. When fully charged, the indictor will glow steadily. When
the battery needs charging, the indicator will flash. To charge, connect the iP56 to a working AC outlet.
End-Of-Life Battery Disposal Instructions
The iP56 uses an internal
Caution: The Battery used in this device may present a risk of fire, explosion or chemical burn if mistreated
Battery shall not be exposed to excessive heat such as fire, or the like. Do not use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Do not leave your battery discharged or unused for extended periods of time. When batteries are misused, they may explode or leak, causing burns and personal injury. If your battery leaks, use normal precaution and cease using the product right away.
3