Installing (or replacing) the batteries

-

cl1 Set the battery replacement switch on the back of the unit to “REPLACE BATTERIES” (exposing the red dot). (Fig. 1)

q2 Slide off the operation battery cover. (Fig. 1)

c3l Insert the two batteries atop the ribbon tab, as shown. (Fig. 2)

c4l Replace the operation battery cover. (Fig. 3)

5Set the battery replacement switch to

0

“NORMAL OPERATION”. (Fig. 3)

If this is the first time you have installed batteries in your unit, proceed to the following steps.

6While holding down the [m] key

0

on the keyboard, push the RESET button on the back of the unit using the touch pen or a similar object.

replacement switch

7When a message appears, touch m/ to initialize the unit,

0

completely clearing the memory.

On average, you can expect to get about two months of battery life based on one hour a day of constant use. Actual battery life will vary depending on individual use.

See “Getting the Unit Up and Running,” Chapter 1, formor& details.

Page 5
Image 5
Sharp IQ-8920 Installing or replacing the batteries, C4l Replace the operation battery cover. Fig, Normal OPERATION. Fig