Sharp IQ-8920, IQ-8900 manual Iram Card Transfer ,+, see P, SET FA% Options

The Peripherals			Menu
					Prints entries in an application (see p. 225, p. 226
	EPERIPHERALS				and p. 227).
		PRINT	b- -
					Sets up data exchanges with personal computers
		PC LINK MODE		-I-- (see p. 251).
		TERMINAL MODE		7Opens the Terminal mode, which is used for
					modem communications (see p. 253).

UNIT TO UNIT TRANSFER b- L Transfers data between 8900/9000 Series units

IRAM CARD TRANSFER ,+, (see P. 244).

Ipifm=;;;;:;3;y between a RAM card and the unit

					Converts data from other SHARP Oroanizer models
					or data created on a computer with &ganizer Link
					software for the 7000/8000 Series (see p. 249).
				LGlobal settings menu for data transfer.
EGLOBAL SETTINGS
SET	PRINTER	PATH			Selects the printer path (see p. 224).
SET	PRINTER	EMULATION	t	J	Selects the printer type (see p. 223).

[MORE EMULATI~-JNS-J )- _---Selects a “generic”printer type/character set. Also selects the paper type (see p. 224).

LSET------ConfiguresPCLINK PATH data		)- transfer					to/from	computers	via
						infrared port or cable (see p. 251).
	SET UNIT TO UNIT PATH		t 1
	SET FA% OPTIONS	b		(		Configures data transfer to/from other 8900/9000
						Series units via infrared port or cable (see p. 244).
	SET DATA DESTINATION )- --				-Configures fax/modem, sets up cover sheet and fax
	PERIPHERALS					functions (see p. 227).
					-Designates the destination for data received during
						unit-to-unit transfers. (Can be selected only when a
						RAM card is installed. See p. 251).
				-Goes back to PERIPHERALS menu.

Application IC Cards

Many application IC cards are available as options for the unit, as well as RAM cards to add extra memory. Simply press [m) to access the function of an installed IC card.

The cards can be operated by touching the card keypad that appears on the display.

There are some restrictions when using IC cards formatted for units other than 8900/9000 series. (see p. 274).

Installing 1. Turn the unit off.

220 an ” card 2. Close the unit and turn it over.